We supply a wide range of freeze drying chambers and accessories, and spare parts designed for use with LyoDry Benchtop Freeze Dryers, or LyoDry Midi or LyoDry Midi Pro Freeze Dryers.
In most cases, they are also compatible with Edwards or Savant Modulyo and Supermodulyo freeze dryers. Please Contact Us for a quotation or any further information about the items below.
Acrylic Bell Jar
Part No: LSDCS
Working height 215mm, Overall height 225mm, OD 212mm, Wall 6mm, including 1 x 8" L-gasket
USE WITH:
- MICROMODULYO
- LYODRY COMPACT
- LYODRY BENCHTOP PRO
- MODULYO
Acrylic Drying Chamber
Part No: LSDC
Acrylic drying chamber: 350mm diameter x 435mm high, includes clear acrylic lid and 2 x L-gaskets. Direct replacement for Edwards Acrylic Chamber part no F056-52-000
USE WITH:
- LYODRY COMPACT
- LYODRY BENCHTOP PRO
- LYODRY MIDI
- LYODRY MIDI PRO
- MODULYO
- SUPERMODULYO
Acrylic Drying Chamber with 8-Port Valve Lid
Part No: LSDCV
Multipurpose freeze dryer chamber for bulk drying and flask drying comprising: Acrylic chamber:350mm diameter x 435mm high, and 2 x L-gaskets. With 8-port valve lid assembly, including 8 x removable neoprene vacuum isolation valves 3/4" ID.
USE WITH:
- LYODRY COMPACT
- LYODRY BENCHTOP PRO
- LYODRY MIDI
- LYODRY MIDI PRO
- MODULYO
- SUPERMODULYO
Heated Tray Drying Accessory
Part No: LSAD6H
Heated tray drying accessory comprising: Acrylic drying chamber 350mm diameter x 435mm high, lid and 2 x L-gaskets, complete with 6 SS product tray rack assembly, heater mats and temperature controller (0°C – 60°C). 230V, 50Hz supply (alternative supply available upon request). This accessory can also be supplied with an 8-port acrylic lid with 8 x neoprene valves (part number LSAD6H-SP).
Work Table
Part No: LSWT
Designed for use inside Acrylic Bell Jar (part no LSDCS) to fit over the Micromodulyo Accessory Flange.Overall height: 30mm, 180mm diameter, 15mm clearance
USE WITH:
- MICROMODULYO
- LYODRY COMPACT
- LYODRY BENCHTOP PRO
- MODULYO
2-Shelf Drying Rack Assembly
Part No: LSD2
2-tray stainless steel drying rack assembly for use inside LSDC acrylic chamber).
Diameter: 310 mm; diameter of hole: 70mm; height of rack: 265mm; height of each layer: 132.5mm
USE WITH:
- LYODRY COMPACT
- LYODRY BENCHTOP PRO
- LYODRY MIDI
- LYODRY MIDI PRO
- MODULYO
- SUPERMODULYO
6-Tray Drying Rack Assembly
Part No: LSD6
6-tray drying rack assembly (for use inside LSDC acrylic chamber 350mm x 435mm), SS, unheated
Each individual tray is 284mm diameter x 30mm height 0.063m², giving a total drying area of 0.38m². . Trays are removable. Individual replacement trays can also be supplied (Part No LSDT1)
USE WITH:
- LYODRY COMPACT
- LYODRY BENCHTOP PRO
- LYODRY MIDI
- LYODRY MIDI PRO
- MODULYO
- SUPERMODULYO
24-Port Column Manifold
Part No: LSPM24
24-port column manifold for external drying of larger volumes of liquids or slurries in flasks. Includes 24 ports, mounted radially around column with removable neoprene valves, each of which can be fitted with a flask of up to 1 litre capacity (flasks not supplied). A manifold sealing gasket is provided to seal the base. Direct replacement for Edwards 24-port column manifold, part number F056-22-000.
​
An 8-port manifold can also be supplied, part number LSPM8. Direct replacement for Edwards 8-port column manifold, part number F056-56-000.
Secondary Drying Manifold
Part No: LSDM96
96-port secondary drying manifold supplied with 96 x adaptor nipples. Note: image shows a 96-port. Also available: 24-port and 48 port. Please ask for details. Designed to accommodate desorption or
secondary drying of samples contained in glass ampules (ampules not supplied). Direct replacement for Edwards Secondary Drying Manifold pt no F029-65-000
Spin Freezer
Part No: LSSP
Spin freezer with 5 interchangeable carriers, 230V, 50Hz supply (alternative supply available upon request). Spin Freezer utilizes evaporative cooling and centrifugation to freeze samples in a thin layer on one side of each ampule for faster drying.
Trolley for LyoDry Benchtop Freeze Dryer
Part No: LSCT
Purpose built, stainless steel trolley with castors and brakes. With bottom shelf to accommodate vacuum pump. Lower than a standard lab bench for easy access to drying accessory.
10-Tray
Freeze Dryer Chamber
Part No: LSCC10
SS freeze drying chamber, with 10 removable trays each measuring 450mm wide x 345mm deep. With single viewport. Available unheated as standard, or with optional heating. Optional manifold assembly for flask drying. 5 tray version also available, part number LSCC5.
Vacuum Pump for LyoDry Benchtop Freeze Dryer
Part No: CRVPRO8
Recommended Vacuum Pump for use with LyoDry Compact, LyoDry Benchtop Pro or Modulyo Freeze Dryer. Comprising: Welch CRVPro8 vacuum pump complete with mains lead, oil and exhaust mist filter. Supplied and serviced by MechaTech Systems Ltd.
Freeze Dryer Spare Parts
Rubber Valve for Pipe Manifold
Part No: LSRV
Neoprene rubber/plastic manifold vacuum isolation valve, 3/4" ID (F05648000).
Approximate measurements:
each end: 30mm OD with 16mm hole diameter
USE WITH:
- LSPM24 COLUMN MANIFOLD
- LSRV 8-PORT CHAMBER
- EDWARDS COLUMN MANIFOLD
- EDWARDS DRUM MANIFOLD
B19 Adaptor
Part No: LSB19
B19 rubber adaptor, to connect manifold tap to freeze drying flask (flasks not supplied).
Approximate measurements: one end: 12mm OD with 5mm hole diameter; other end: 20mm OD with 12mm hole diameter; length: 32mm
USE WITH:
- LSPM24 COLUMN MANIFOLD
- LSRV 8-PORT CHAMBER
- EDWARDS COLUMN MANIFOLD
- EDWARDS DRUM MANIFOLD
B24 Adaptor
Part No: LSB24
B24 rubber adaptor, to connect manifold tap to freeze drying flask (flasks not supplied). Approximate measurements: one end: 22mm OD with 6mm hole diameter;
other end: 25mm OD with 12mm hole diameter; length: 33mm
USE WITH:
- LSPM24 COLUMN MANIFOLD
- LSRV 8-PORT CHAMBER
- EDWARDS COLUMN MANIFOLD
- EDWARDS DRUM MANIFOLD
B29 Adaptor
Part No: LSB29
B29 rubber adaptor, to connect manifold tap to freeze drying flask (flasks not supplied). Approximate measurements:
one end: 26mm OD with 9mm hole diameter; other end: 29mm OD with 12mm hole diameter; length: 33mm
USE WITH:
- LSPM24 COLUMN MANIFOLD
- LSRV 8-PORT CHAMBER
- EDWARDS COLUMN MANIFOLD
- EDWARDS DRUM MANIFOLD
Plastic Connector
Part No: LSPC
Plastic connector - to connect B19, B24 or B29 adaptor to LSRV rubber valve. Approximate measurements: one end: 12mm OD with 7mm hole diameter;
other end: 16mm OD with 12mm hole diameter; length: 39mm
USE WITH:
- LSPM24 COLUMN MANIFOLD
- LSRV 8-PORT CHAMBER
- EDWARDS COLUMN MANIFOLD
- EDWARDS DRUM MANIFOLD
Acrylic Lid
Part No: LSLID
Acrylic lid, clear, 350mm diameter x 25mm thickness, for Acrylic Chamber (direct replacement for Edwards part number F056-32-000)
USE WITH:
- LSDC ACRYLIC CHAMBER
- EDWARDS ACRYLIC CHAMBER
F056-52-000
Acrylic Lid with 8 Ports
Part No: LSVLID
Acrylic lid, clear, 350mm diameter with 8-ports and 8 removable, neoprene vacuum isolation valves, 3/4" ID.
USE WITH:
- LSDC ACRYLIC CHAMBER
- LSDCV ACRYLIC CHAMBER
- EDWARDS ACRYLIC CHAMBER
F056-52-000
L Gasket for Acrylic Chamber
Part No: L-GASKET14
14" L-gasket, nitrile, for benchtop freeze dryer, acrylic drying chamber (for sealing lid and base of acrylic chamber).
USE WITH:
- LSDC ACRYLIC CHAMBER
- LSDCV ACRYLIC CHAMBER
- EDWARDS ACRYLIC CHAMBER
F056-52-000
Sealing Gasket for 8-Port or 24-Port Column Manifold
Part No: LSPGAS
L-gasket for LSPM8 and LSPM24 column manifold, silicone rubber (blue), 215mm outer diameter, 195mm inner diameter
USE WITH:
- LSPM24 COLUMN MANIFOLD
- EDWARDS COLUMN MANIFOLD
Adaptor Nipples for Secondary Drying Manifold
Part No: LSAN
Replacement adaptor nipples, 6mm thread, cone diameter 5 - 7.5 mm, minimum order quantity of 48 pieces (F00203008)
USE WITH:
- LSDM SECONDARY DRYING
MANIFOLD
- EDWARDS SECONDARY DRYING
MANIFOLD F029-65-000
Stainless steel drying tray
Part No: LSDT1
Single SS tray for LSD6 assembly, 284mm diameter x 30mm height
USE WITH:
- LSD6 TRAY DRYING ACCESSORY
- EDWARDS TRAY DRYING
ACCESSORY
Acrylic Adaptor Plate
Part No: LSDCAP
Acrylic adaptor plate for vertically stacking 2 x LSDC Acrylic Chambers (detailed above) to double the chamber size.
USE WITH:
- LSDC ACRYLIC CHAMBER
- EDWARDS 350MM DIA ACRYLIC
CHAMBER