We supply a wide range of freeze drying chambers and accessories, and spare parts designed for use with LyoDry Benchtop Freeze Dryers, or LyoDry Midi or LyoDry Midi Pro Freeze Dryers.
In most cases, they are also compatible with Edwards or Savant Modulyo and Supermodulyo freeze dryers. Please Contact Us for a quotation or any further information about the items below.
CHAMBERS & ACCESSORIES FOR LYODRY, MODULYO & SUPERMODULYO FREEZE DRYERS
Scroll down for Spare Parts (acrylic lids, manifold taps etc) Need help, a quote or to place an order? Please Contact Us.
Acrylic Bell Jar
Part No: LSDCS
COMPATIBLE WITH: MICROMODULYO,
LYODRY BENCHTOP, MIDI, MODULYO OR SUPERMODULYO
Working height 215mm, Overall height 225mm, OD 212mm, Wall 6mm, including 1 x 8" L-gasket
Part No: LSWT
Work Table
Designed for use inside Acrylic Bell Jar (part no LSDCS) to fit over the Micromodulyo Accessory Flange.Overall height: 30mm, 180mm diameter, 15mm clearance
COMPATIBLE WITH: MICROMODULYO,
LYODRY BENCHTOP, MIDI, MODULYO OR SUPERMODULYO
Part No: LSDC
Acrylic Drying Chamber
COMPATIBLE WITH:
LYODRY BENCHTOP, MIDI, MODULYO OR SUPERMODULYO
Acrylic drying chamber: 350mm diameter x 435mm high, includes clear acrylic lid and 2 x L-gaskets. Direct replacement for Edwards Acrylic Chamber part no F056-52-000
Part No: LSD6
6-Tray Drying Rack Assembly
6-tray drying rack assembly for use inside LSDC acrylic chamber 350mm x 435mm), SS , unheated. Each individual, removable tray is 284mm diameter x 30mm high, 0.063m², giving a total drying area of 0.38m².
COMPATIBLE WITH:
LYODRY BENCHTOP, MIDI, MODULYO OR SUPERMODULYO
Heated Tray Drying Accessory
Part No: LSAD6H
Heated tray drying accessory comprising: Acrylic drying chamber 350mm diameter x 435mm high, lid and 2 x L-gaskets, complete with 6 SS product tray rack assembly, heater mats and temperature controller (0°C – 60°C). 230V, 50Hz supply (alternative supply available upon request). This accessory can also be supplied with an 8-port acrylic lid with 8 x neoprene valves (part number LSAD6H-SP).
COMPATIBLE WITH:
LYODRY BENCHTOP PRO,
MIDI PRO, MODULYO OR SUPERMODULYO
Part No: LSDCV
Acrylic Drying Chamber with 8-Port Valve Lid
Multipurpose freeze dryer chamber for bulk drying and flask drying comprising: Acrylic chamber:350mm diameter x 435mm high, and 2 x L-gaskets. With 8-port valve lid assembly, including 8 x removable neoprene vacuum isolation valves 3/4" ID.
COMPATIBLE WITH:
LYODRY BENCHTOP, MIDI, MODULYO OR SUPERMODULYO
SS Drying Chamber with 8-Port Acrylic Lid
Part No: LSDRV
COMPATIBLE WITH:
LYODRY BENCHTOP, MIDI, MODULYO OR SUPERMODULYO
Multipurpose freeze dryer chamber for bulk drying and flask drying comprising: Stainless steel chamber:350mm diameter x 435mm high, and 2 x L-gaskets. With 8-port acrylic lid, including 8 x removable neoprene vacuum isolation valves 3/4" ID.
Part No: LSPM24
24-Port Column Manifold
COMPATIBLE WITH:
LYODRY BENCHTOP, MIDI, MODULYO OR SUPERMODULYO
24-port column manifold for external drying of larger volumes of liquids or slurries in flasks. Includes 24 ports, mounted radially around column with removable neoprene valves, each of which can be fitted with a flask of up to 1 litre capacity (flasks not supplied). A manifold sealing gasket is provided to seal the base. Direct replacement for Edwards 24-port column manifold, part number F056-22-000.
​
An 8-port manifold can also be supplied, part number LSPM8. Direct replacement for Edwards 8-port column manifold, part number F056-56-000.
Secondary Drying Manifold
Part No: LSDM96
COMPATIBLE WITH:
LYODRY BENCHTOP, MIDI, MODULYO OR SUPERMODULYO
96-port secondary drying manifold.Note: image shows a 96-port. Also available: 24-port and 48 port. Please ask for details. Designed to accommodate desorption or
secondary drying of samples contained in glass ampules (ampules not supplied).
Spin Freezer
Part No: LSSP
COMPATIBLE WITH:
LYODRY BENCHTOP, MIDI, MODULYO OR SUPERMODULYO
Trolley for & Benchtop Freeze Dryer
Part No: LSCT
COMPATIBLE WITH:
LYODRY COMPACT, OR LYODRY BENCHTOP PRO
Part No: LSCC10
10 Tray Freeze Dryer Chamber
SS freeze drying chamber, with 10 removable trays each measuring 450mm wide x 345mm deep. With single viewport. Available unheated as standard, or with optional heating. Optional manifold assembly for flask drying. 5 tray version also available, part number LSCC5.
COMPATIBLE WITH:
LYODRY MIDI, OR SUPERMODULYO
Spin freezer with 5 interchangeable carriers, 230V, 50Hz supply (alternative supply available upon request). Spin Freezer utilizes evaporative cooling and centrifugation to freeze samples in a thin layer on one side of each ampule for faster drying.
Purpose built SS trolley with castors and brakes. With bottom shelf to accommodate vacuum pump. Lower than a standard lab bench for easy access to drying accessory.
Vacuum Pump for Benchtop Freeze Dryer
Part No: CRVPRO8
COMPATIBLE WITH:
LYODRY COMPACT, OR LYODRY BENCHTOP PRO
Recommended Vacuum Pump for use with LyoDry Compact, LyoDry Benchtop Pro or Modulyo Freeze Dryer. Comprising: Welch CRVPro8 vacuum pump complete with mains lead, oil and exhaust mist filter. Supplied and serviced by MechaTech Systems Ltd.
SPARE PARTS
FOR LYODRY, MODULYO & SUPERMODULYO FREEZE DRYER ACCESSORIES
Part No: LSRV
Rubber Valve for Pipe Manifold
COMPATIBLE WITH:
LSPM24 COLUMN MANIFOLD
LSRV 8-PORT CHAMBER
EDWARDS MODULYO COLUMN MANIFOLD
Neoprene rubber/plastic manifold vacuum isolation valve, 3/4" ID (F05648000).
Approximate measurements:
each end: 30mm OD with 16mm hole diameter
Part No: LSB19
B19 Adaptor
COMPATIBLE WITH:
LSPM24 COLUMN MANIFOLD
LSRV 8-PORT CHAMBER
EDWARDS MODULYO COLUMN MANIFOLD
B19 rubber adaptor, to connect manifold tap to freeze drying flask (flasks not supplied).
Approximate measurements: one end: 12mm OD with 5mm hole diameter; other end: 20mm OD with 12mm hole diameter; length: 32mm
Part No: LSB24
B24 Adaptor
COMPATIBLE WITH:
LSPM24 COLUMN MANIFOLD
LSRV 8-PORT CHAMBER
EDWARDS MODULYO COLUMN MANIFOLD
B24 rubber adaptor, to connect manifold tap to freeze drying flask (flasks not supplied). Approximate measurements: one end: 22mm OD with 6mm hole diameter;
other end: 25mm OD with 12mm hole diameter; length: 33mm
B29 Adaptor
Part No: LSB29
COMPATIBLE WITH:
LSPM24 COLUMN MANIFOLD
LSRV 8-PORT CHAMBER
EDWARDS MODULYO COLUMN MANIFOLD
B29 rubber adaptor, to connect manifold tap to freeze drying flask (flasks not supplied). Approximate measurements:
one end: 26mm OD with 9mm hole diameter; other end: 29mm OD with 12mm hole diameter; length: 33mm
Part No: LSPC
Plastic Connector
COMPATIBLE WITH:
LSPM24 COLUMN MANIFOLD
LSRV 8-PORT CHAMBER
EDWARDS MODULYO COLUMN MANIFOLD
Plastic connector - to connect B19, B24 or B29 adaptor to LSRV rubber valve. Approximate measurements: one end: 12mm OD with 7mm hole diameter;
other end: 16mm OD with 12mm hole diameter; length: 39mm
Part No: LSLID
Acrylic Lid
COMPATIBLE WITH:
LSDC ACRYLIC CHAMBER
EDWARDS 350MM ACRYLIC CHAMBER
Acrylic lid, clear, 350mm diameter x 25mm thickness, for Acrylic Chamber (direct replacement for Edwards part number F056-32-000)
Part No: LSVLID
Acrylic Lid with 8 ports
COMPATIBLE WITH:
LSDC ACRYLIC CHAMBER
LSDCV ACRYLIC CHAMBER
EDWARDS 350MM ACRYLIC CHAMBER
Acrylic lid, clear, 350mm diameter with 8-ports and 8 removable, neoprene vacuum isolation valves, 3/4" ID.
L Gasket for Acrylic Chamber
Part No: L-GASKET14
COMPATIBLE WITH:
LSDC ACRYLIC CHAMBER
LSDCV ACRYLIC CHAMBER
EDWARDS 350MM ACRYLIC CHAMBER
14" L-gasket, nitrile, for benchtop freeze dryer, acrylic drying chamber (for sealing lid and base of acrylic chamber).
Sealing Gasket for 8-Port or 24-Port Column Manifold
Part No: LSPGAS
COMPATIBLE WITH:
LSPM8 8-PORT COLUMN MANIFOLD
LSPM24 24-PORT COLUMN MANIFOLD
EDWARDS COLUMN MANIFOLD (8-PORT AND 24-PORT)
L-gasket for LSPM8 and LSPM24 column manifold, silicone rubber (blue), 215mm outer diameter, 195mm inner diameter
Part No: LSAN
Adaptor Nipples for Secondary Drying Manifold
COMPATIBLE WITH:
LSDM48 SECONDARY DRYING MANIFOLD
EDWARDS SECONDARY DRYING MANIFOLD
Replacement adaptor nipples, 6mm thread, cone diameter 5 - 7.5 mm, minimum order quantity of 48 pieces (F00203008)
Part No: LSDT1
Stainless steel drying tray
COMPATIBLE WITH:
LSD6 TRAY ACCESSORY
EDWARDS TRAY ACCESSORY
Single SS tray for LSD6 assembly, 284mm diameter x 30mm height
Part No: LSDCAP
Acrylic Adaptor Plate
COMPATIBLE WITH:
LSDC ACRYLIC CHAMBER
EDWARDS 350MM ACRYLIC CHAMBER
Acrylic adaptor plate for vertically stacking 2 x LSDC Acrylic Chambers (detailed above) to double the chamber size.